ProLiant DL 380 Maintenance and Service Guide

Removal and Replacement Procedures 2-35
CPU Fan
To remove the CPU fan:
1. Complete the preparation procedures. See “Powering Down the Server” earlier in this
chapter.
2. Remove the server cover. See “Server Cover” earlier in this chapter.
3. Remove the processor(s) from the processor retaining posts. See “Processor” earlier in this
chapter.
4. Remove the two processor retaining posts closest to the CPU fan.
5. Remove the four screws securing the fan assembly to the chassis.
6. Unplug the CPU fan assembly from the system board .
7. Remove the CPU fan from the back of the chassis .
3
1
2
Figure 2-29. Removing the CPU fan
Reverse steps 1 through 7 to replace the CPU fan.