ProLiant DL 380 Maintenance and Service Guide

Chapter 2
Removal and Replacement Procedures
This chapter provides subassembly/module-level removal and replacement procedures for
Compaq ProLiant DL380 Servers. After completing all necessary removal and replacement
procedures, run the Diagnostics program to verify that all components operate properly.
The following tools are recommended:
■ Torx T-15 screwdriver
■ Torx T-7 screwdriver
■ From the SmartStart and Support Software CD:
G System Configuration Utility software
G Array Diagnostics Utility (ADU)
G Diagnostics software