ProLiant DL 380 Maintenance and Service Guide
12 Compaq ProLiant DL380 Maintenance and Service Guide
signal cable header,
identified 4-4
temperature range 5-3
voltage input 5-3
power supply backplane board
part number 1-5
removing 2-15
removing, illustrated 2-15
replacing 2-15
power supply blank
removing 2-13
removing, illustrated 2-13
replacing 2-13
power supply fan and bracket
removing 2-12
removing, illustrated 2-12
replacing 2-12
power supply fan cover, part
number 1-6
power supply fan guard, part
number 1-6
power supply fan header,
identified 4-4
power supply LED indicators,
illustrated 4-8
power switch connector,
identified 4-4
power switch LED indicators
illustrated 4-7
table 4-7
power switch, positions 2-4
Power-On Self-Test See POST
processor
aligning with slot 2-33
locations, identified 2-32
part number 1-5
removing 2-33
removing, illustrated 2-33
replacing 2-33
system board locations 2-32
system board locations,
illustrated 2-32
test error codes 3-24
Processor Power Module
part number 1-5
removing 2-34
removing, illustrated 2-34
replacing 2-34
slots, identified 4-4
system board locations 2-32
system board locations,
illustrated 2-32
processor slots, identified 4-4
R
rack warnings 2-6
rack-mount bezel
part number 1-3
removing 2-9
removing, illustrated 2-9
replacing 2-9
Rapid Recovery Engine,
enabling 3-49
rapid recovery services 3-49
rear panel components,
illustrated 4-2
recovery
attended 3-51
automatic 3-49, 3-50
environmental 3-50
from software error 3-50
rapid recovery services 3-49
unattended 3-50
remote management features,
defined 3-65
Remote Management, defined 3-67
remote service features,
defined 3-65
Remote Utilities, accessing 3-23
removable media bay
installing additional drives 2-23
removable media blank
part number 1-3
removing 2-23
removing, illustrated 2-23
replacing 2-23
removable media device drive cage,
part number 1-3
removable media drive, installing
additional 2-23
removal and replacement
procedures 2-1
removal and replacement procedures,
preparation 2-4
resource conflict, resolving 3-3
return kit, part number 1-6
Revision History Table
accessing 3-63
defined 3-63
where stored 3-63
riser board
expansion slots, illustrated 4-3
LED indicators, illustrated 4-14
part number 1-5
removing 2-28
removing, illustrated 2-28
replacing 2-28
slot, identified 4-4