ProLiant DL 380 Maintenance and Service Guide

2 Compaq ProLiant DL380 Maintenance and Service Guide
ASR-2 IML log messages See error
log messages
Asset Management, defined 3-67
audible beeps, during POST 3-8
Automatic Data Collection,
defined 3-68
Automatic Revision
Tracking See ART
Automatic Server
Recovery-2 See ASR-2
automatic storage reconstruction,
defined 3-64
B
backplane board
removing 2-21
removing, illustrated 2-21
replacing 2-21
baffle, part number 1-6
battery
disposal 2-39
location, identified 4-4
part number 1-6
removing 2-40
removing, illustrated 2-40
replacing 2-40
beeps, during POST 3-8
bezel, rack-mount
part number 1-3
removing 2-9
removing, illustrated 2-9
replacing 2-9
BIOS settings, reconfiguring 2-39
blank option board bracket, part
number 1-6
buns, part number 1-6
C
cables
14-pin power signal head cable,
part number 1-6
20-pin main power cable, part
number 1-6
CD data shredded, part
number 1-6
hard drive/CD power assembly,
part number 1-6
routing diagrams 2-25
SCSI 1-device shredded, part
number 1-6
SCSI 2-device shredded, part
number 1-6
carton, part number 1-6
cautions
ADU 3-33
battery disposal 2-39
BIOS settings 2-39
cable routing 2-25
controller firmware
upgrade 3-33
data loss 3-5
defined vii
diskette drive removal 2-10
electrostatic discharge 2-5,
2-31, 2-33
Erase Utility 3-5
firmware upgrade 3-33
grounding viii
nonsupported drives 2-17
overheating viii, 2-6
removing all power from
system 2-4
symbols on equipment 2-3
ventilation clearances viii
CD tray assembly, part number 1-6
CD-ROM drive
access times 5-5
applicable disk 5-5
audio connector, identified 4-4
block size 5-5
cable routing, illustrated 2-25
cables, part number 1-6
cache/buffer 5-5
capacity 5-5
connector, identified 4-4
data transfer rate 5-5
depth 5-5
diameter 5-5
dimensions 5-5
height 5-5
laser parameters 5-5
LED indicators, illustrated 4-12
operating conditions 5-5
part number 1-5
removing 2-22
removing, illustrated 2-22
replacing 2-22
specifications 5-5
startup time 5-5
stop time 5-5
test error codes 3-32
thickness 5-5
track pitch 5-5
weight 5-5
width 5-5
chassis, part number 1-3
Client Management, defined 3-67
communication parameters,
setting 3-56