Compaq ProLiant DL380 Setup and Installation Guide
3-18
Compaq ProLiant DL380 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer:
Gilbert Saldivar
Project:
Compaq ProLiant DL380 Setup and Installation Guide
Comments:
Part Number:
120133-002
File Name:
d-ch03 Installing Hardware Options.doc
Last Saved On:
12/10/99 1:11 PM
4
5
5
4
3
2
1
0
Figure 3-16. Mass storage device placement for ProLiant DL380 with two
drives installed in 2 x 1-inch optional drive cage.
Replacing the 1.44-MB Diskette Drive
Removing the 1.44-MB Diskette Drive
1.
If the server is on, place it in Standby mode and disconnect the power
cord(s). Refer to Chapter 2, “Installing the ProLiant DL380 Server.”
2.
Pull the server forward in the rack to access the inside of the server.
3.
Remove the server access panel.










