Compaq ProLiant DL380 Setup and Installation Guide

3-12

Compaq Confidential – Need to Know Required

Writer:

Gilbert Saldivar

Project:

Compaq ProLiant DL380 Setup and Installation Guide

Comments:

Part Number:

120133-002

File Name:

d-ch03 Installing Hardware Options.doc

Last Saved On:

12/10/99 1:11 PM

Figure 3-10. ProLiant DL380 riser board slots

Installing an Expansion Board

Installing the Board

To install an expansion board, refer to the following installation procedure.

WARNING:

To reduce the risk of personal injury, be careful when installing and

removing expansion boards. The access panel retaining clasps can pinch or cut

your fingers. Do not attempt to force boards in or out of position.

If the server is on, shut down the operating system, place it in Standby

mode, and disconnect the power cords. See Chapter 2, “Installing the

ProLiant DL380 Server.”

Slide the server out from the rack.

Remove the server access panel.