Compaq ProLiant DL380 Setup and Installation Guide

Installing Hardware Options
3-3
Compaq Confidential – Need to Know Required
Writer:
Gilbert Saldivar
Project:
Compaq ProLiant DL380 Setup and Installation Guide
Comments:
Part Number:
120133-002
File Name:
d-ch03 Installing Hardware Options.doc
Last Saved On:
12/10/99 1:11 PM
1
1
Figure 3-1. Locating thumbscrews on front bezel
6. Pull the server out from the rack.
IMPORTANT:
It is not necessary to remove the server completely from the rack.
7. On the front of the unit, loosen the three thumbscrews that secure the
server access panel.
8. Slide the server access panel toward the rear of the unit about 1 inch
(2.5 cm) and remove the access panel.
Figure 3-2. Loosening thumbscrews and removing the server access panel