Compaq ProLiant DL380 Setup and Installation Guide

Installing the ProLiant DL380 Server

2-25

Compaq Confidential – Need to Know Required

Writer:

Gilbert Saldivar

Project:

Compaq ProLiant DL380 Setup and Installation Guide

Comments:

Part Number:

120133-002

File Name:

c-ch02 Server Installation Overview.doc

Last Saved On:

12/10/99 1:04 PM

Carefully align the server component rails with the rack slide rails, as

shown in the following figure.

Figure 2-19. Aligning the server component rails with the rack rails

Ensure that the server component rails are fully engaged into the plastic

guides and bearings on the rack rails on both sides, then slowly slide the

server into the rack. The server slides forward until the release latches

engage the rack rails.

WARNING:

To reduce the risk of personal injury, be careful when pressing the

server rail release latches and sliding the component into the rack. The slide

rails could pinch your fingertips.

CAUTION:

Be sure to keep the server parallel to the floor when sliding the

server rails into the slide rails. Tilting the server up or down could result in

damage to the rails.