Compaq ProLiant DL380 Setup and Installation Guide

Installing the ProLiant DL380 Server

2-21

Compaq Confidential – Need to Know Required

Writer:

Gilbert Saldivar

Project:

Compaq ProLiant DL380 Setup and Installation Guide

Comments:

Part Number:

120133-002

File Name:

c-ch02 Server Installation Overview.doc

Last Saved On:

12/10/99 1:04 PM

Secure the back end of the mounting bracket assembly to the back

corner brace of the rack with one M6 x 1.0-12L Phillips screw through

the bottom hole of the left side of the bracket and the cage nut and one

screw through the bottom hole of the right side of the bracket and cage

nut, as shown.

Figure 2-14. Attaching the back of mounting bracket assembly to the rack

(left view)

NOTE:

The screw holes on rear of the brackets are oval holes.

Figure 2-15. Attaching the back of the mounting bracket assembly to the rack

(right view)

After attaching both of the mounting bracket assemblies to the rack,

prepare the server for mounting into the rack.