Compaq ProLiant DL380 Setup and Installation Guide

Installing the ProLiant DL380 Server
2-13
Compaq Confidential – Need to Know Required
Writer:
Gilbert Saldivar
Project:
Compaq ProLiant DL380 Setup and Installation Guide
Comments:
Part Number:
120133-002
File Name:
c-ch02 Server Installation Overview.doc
Last Saved On:
12/10/99 1:04 PM
Figure 2-6. Separated outer bracket rail (top) and server rail
The outer bracket rail consists of two parts: a fixed outer rail that attaches to
the rack mounting bracket and an inner slide on a steel ball-bearing movement.
This inner slide does not detach. To identify the fronts of the rack mounting
bracket and the outer bracket rail, see the following two figures:
■
The front of the rack mounting bracket has alignment tabs on its flange
and the round threaded holes 1.
■
The front of the outer bracket rail allows the inner slide to move forward
on ball bearings 2 and can be identified by the plastic guides.
2
1
Figure 2-7. Identifying the fronts of the rack mounting bracket and the outer
bracket rail