Compaq ProLiant DL380 Setup and Installation Guide

2-4
Compaq ProLiant DL380 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer:
Gilbert Saldivar
Project:
Compaq ProLiant DL380 Setup and Installation Guide
Comments:
Part Number:
120133-002
File Name:
c-ch02 Server Installation Overview.doc
Last Saved On:
12/10/99 1:04 PM
Server Warnings and Precautions
22.6 kg
50 lb
WARNING:
This product is very heavy. To reduce the risk of
personal injury or damage to the equipment:
■
Remove all plug power supplies and modules to reduce the
weight of the product before lifting it.
■
Observe local occupational health and safety requirements and
guidelines for manual material handling.
■
Get help to lift and stabilize the product during installation or
removal, especially when the product is not fastened to the
rails.
■
When installing the product in or removing the product from
the rack, the product will be unstable when not fastened to the
rails.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the
hot-plug drives and the internal system components to cool before touching.
WARNING:
To reduce the risk of electric shock or damage to the equipment:
■
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
■
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
■
Unplug the power cord from each power supply to disconnect power to the
equipment.
CAUTION:
Protect the server from power fluctuations and temporary
interruptions with a regulating uninterruptible power supply (UPS). This device
protects the hardware from damage caused by power surges and voltage spikes
and keeps the system in operation during a power failure.
CAUTION:
The Compaq ProLiant DL380 Server
must always be operated with
the system unit cover on. Proper cooling will not be achieved if the system unit
cover is removed.