Compaq ProLiant DL380 Setup and Installation Guide
1-10
Compaq ProLiant DL380 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer:
Gilbert Saldivar
Project:
Compaq ProLiant DL380 Setup and Installation Guide
Comments:
Part Number:
120133-002
File Name:
b-ch01 Server Features.doc
Last Saved On:
12/10/99 1:03 PM
System Memory
■
System supports 133-MHz registered SDRAM memory (Synchronous
DRAM).
■
Error Checking and Correcting (ECC) memory uses an error-encoding
scheme for memory error detection and correction. Specifically, this
feature detects and corrects single-bit memory errors.
■
System is expandable to 4-GB of memory (when available) installed in
dual-inline memory module (DIMM) sockets. Memory can be expanded
one module at a time.
Expansion Slots
The expansion slots on the riser board are configured as shown.
1
4
3
2
Figure 1-7. Locating ProLiant DL380 expansion slots. These expansion slots
on the riser board correspond to slots on the rear of the server.










