Compaq ProLiant DL380 Setup and Installation Guide

5-16

Compaq Confidential – Need to Know Required

Writer:

Gilbert Saldivar

Project:

Compaq ProLiant DL380 Setup and Installation Guide

Comments:

Part Number:

120133-002

File Name:

f-ch05 Cabling Guidelines.doc

Last Saved On:

12/10/99 1:12 PM

Connecting an Array Controller to the Hot-Plug

Drive Cage Backplane Board

Disconnect the point-to-point SCSI cable from Port 2 on the system board and

attach it to the Array Controller to connect the Controller to the hot-plug drive

cage as shown in the following figure.

Figure 5-8. Example of a point-to-point cable from the array controller to the

hot-plug drive cage

NOTE:

Heat sink and processor mounting hardware may appear different than illustrated.