Compaq ProLiant DL380 Setup and Installation Guide

Cabling Guidelines
5-15
Compaq Confidential – Need to Know Required
Writer:
Gilbert Saldivar
Project:
Compaq ProLiant DL380 Setup and Installation Guide
Comments:
Part Number:
120133-002
File Name:
f-ch05 Cabling Guidelines.doc
Last Saved On:
12/10/99 1:12 PM
External Cabling for Secondary Storage
Table 5-6
External Cabling for Secondary Storage
All ProLiant DL380
Models
DAT Drive,
SLR Drive,
AIT Drive, and DLT Drive
CD Storage System
Integrated Smart Array
Controller
The SCSI Storage Expander
Option Kit or Tape Drive Option
Kit includes the external cable
required for this configuration.
The CD Storage System includes all
necessary cabling for this
configuration.
64-bit Dual-Channel
Wide Ultra2 SCSI
Order Option Kit 295646-B21
for a 6 ft VHDCI-Narrow cable
or
Order Option Kit 295647-B21
for a 12 ft VHDCI-narrow cable
or
Order Option Kit 295644-B21
for a 6 ft VHDCI-Wide cable or
Order Option Kit 295645-B21
for a 12 ft VHDCI-Wide cable
Not Supported.
ProLiant DL380 Cabling Examples
The following examples illustrate cabling scenarios associated with a
ProLiant DL380 server. They are provided as only an overview for installing
and routing some of the cabling scenarios described in the SCSI Cable Usage
Table. Refer to the labels attached to the inside of the system unit access panel
for additional information. If you have any problems, contact your local
Compaq authorized reseller or service provider.