Compaq ProLiant DL380 Setup and Installation Guide

5-4

Compaq Confidential – Need to Know Required

Writer:

Gilbert Saldivar

Project:

Compaq ProLiant DL380 Setup and Installation Guide

Comments:

Part Number:

120133-002

File Name:

f-ch05 Cabling Guidelines.doc

Last Saved On:

12/10/99 1:12 PM

Table 5-1

Rear Panel Connectors

continued

Number Connector

Standard hot-plug power supply, with LED

;

External SCSI access

Expansion slots

Internal Connectors

The main connectors are the two SCSI Ports (Port 1 and Port 2), the diskette

drive connector, and the CD-ROM connector. These connectors are illustrated

in the following figure and table.

CAUTION:

Do not run internal and external devices off the same SCSI channel

(port). When running external storage boxes, you should disconnect the internal

cable from Port 1.

Figure 5-2. Connectors on the system board

NOTE:

Heat sink and processor mounting hardware may appear different than illustrated.