Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380

Troubleshooting 5-17
Compaq Confidential – Need to Know Required
Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380
Comments: Part Number: 221544-001 File Name: f-ch5 Troubleshooting.doc Last Saved On: 12/27/00 11:01 AM
ServerNet I Notice Messages
This section addresses ServerNet I Notice Messages.
Table 5-9
ServerNet I Notice Messages
Messages Description User Action
Barrier failed on path:n
snetID:0xF0nnn curpath:n
Barrier succeeded on path:n
snetID:0xF0nnn curpath:n
These messages display when a
new node attempts to join a
cluster. The message indicates
whether the new node is able to
communicate with the target
node over the given path (X/Y). If
a path is cabled, a success
message is expected. If the path
is not cabled (for example, X
side cabled and Y side not
cabled), a failure message is
expected for that path.
If a barrier transaction fails
when it is expected to succeed,
there is a problem with the path.
Check the cabling and
ServerNet I switch (ensure that it
is powered up) on the indicated
path to the indicated node.
Identified ServerNet I PCI
adapter: SHIP 1.5 Rev n
This informative message
displays during system
initialization to report the
revision of the SPA identified by
the SPAD.
None
continued