Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380

Installing Cluster Software 3-5
Compaq Confidential – Need to Know Required
Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380
Comments: Part Number: 221544-001 File Name: d-ch3 Installing Software.doc Last Saved On: 12/27/00 10:59 AM
13. Page down to the Embedded - Compaq Automated Server Recovery entry.
14. Verify that the following items are disabled:
G Software Error Recovery
G Standby Recovery Server
G UPS Shutdown
Use the arrow keys to select the options and the Enter key to modify
them as necessary.
15. Page down to Embedded-Compaq Integrated Dual Channel Wide Ultra2 SCSI
Controller (Port2).
G Select Controller Order, and then press Enter.
G Select First and press F10. The Configuration Changes screen displays.
G Press Enter to accept the changes.
16. Press F10 to exit the Step 3: View or edit details window. The Steps in
configuring your computer window displays.
17. Use the arrow keys to select Step 5: Save and exit, and then press Enter.
The
Step 5: Save and exit window displays.
18. Select Save the configuration and restart the computer, and then press Enter. A
Reboot window displays.
19. Press Enter. The Array Configuration Utility loads and an Unconfigured Controller
Wizard screen displays.
20. Click Next. The Select a configuration screen displays with RAID 0
highlighted by default.
21. Click Next to select RAID 0. A Configuration Preview screen displays.
22. Click Next. The Configuration Wizard Finished screen displays.
23. Click the Save Configuration Now button. A Compaq Array Configuration
Utility window displays.
24. Select ControlleràExit from the menu bar.
Wait while the system partition installation completes. Wait while the
server reboots and sets up hardware. After two reboots,
SmartStart-Manual
Path
window displays.