Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380

2-12 Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380
Compaq Confidential – Need to Know Required
Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380
Comments: Part Number: 221544-001 File Name: c-ch2 Setting Up Hardware.doc Last Saved On: 12/27/00 10:59 AM
Cabling the Public LAN Connection
For interconnects using ServerNet I, connect the public LAN Ethernet cable to
the embedded NIC of the servers. See Figure 2-2 earlier in this chapter.
For interconnects using Ethernet, connect the public LAN Ethernet cable to the
NC3123 NIC into slot 1 of the servers. See Figure 2-4.
Ethernet Crossover
Cable
Public Network
Node 1 Node 2
CI Serial Cable
Figure 2-4. Example of cabling the cluster interconnect of a cluster that uses
Ethernet
NOTE: Cabling for the external storage is intentionally not shown.