HP ProLiant DL380 G6 Server Maintenance and Service Guide

Removal and replacement procedures 50
7.
Remove the expansion board.
To replace the component, reverse the removal procedure.
Heatsink
To remove the heatsink:
1. Power down the server (on page 24).
2. Extend the server from the rack (on page 25).
3. Remove the access panel ("Access panel" on page 29).
4. If full-length expansion boards are installed, remove the PCI riser cage.
5. Remove the air baffle ("Air baffle" on page 41).
6. Open the heatsink retaining bracket.