Compaq ProLiant DL380 Generation 2 Setup and Installation Guide

Installing the Server 4-17

Compaq Confidential – Need to Know Required

Writer: Rob Weaver Project: Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide Comments:

Part Number: 203844-001 File Name: e-ch4 Installing the Server.doc Last Saved On: 3/27/01 1:33 PM

Securing the Cables to the Cable Management Arm

Collect the cables connected to the rear of the server, and use the

hook-and-latch strips attached to the arm to secure the cables.

Figure 4-15. Cables routed in the cable management arm

If you are cabling multiple ProLiant DL380 Generation 2 servers in the rack,

refer to the multiple server deployment white paper at the Compaq website: