Compaq ProLiant DL380 Generation 2 Setup and Installation Guide

Installing the Server 4-13
Compaq Confidential – Need to Know Required
Writer: Rob Weaver Project: Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203844-001 File Name: e-ch4 Installing the Server.doc Last Saved On: 3/27/01 1:33 PM
3. Attach the cable management arm to the rack:
a. Align the unattached end of the cable management arm on the
outside of the rear brace of the rack.
b. Insert the hook into the rack hole .
c. Press down to seat the arm in the rack .
d. Fasten the thumbscrew through the rack hole into the rear of the
standard rail
.
1
2
3
Figure 4-13. Attaching the cable management arm to the rear brace of the
rack