Compaq ProLiant DL380 Generation 2 Setup and Installation Guide

Installing Hardware Options 3-37
Compaq Confidential – Need to Know Required
Writer: Rob Weaver Project: Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203844-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 4/5/01 1:55 PM
2. Open the PCI riser cage door.
Figure 3-34. Opening the PCI riser cage door
3. Lift the PCI shipping bracket and remove it from the PCI riser cage.
NOTE: You can remove the PCI shipping bracket without removing the PCI riser cage.
Figure 3-35. Removing the PCI shipping bracket
The PCI shipping bracket is only required if you intend to ship the server with
PCI expansion boards installed. If you are not installing the bracket, store it for
future use.