Compaq ProLiant DL380 Generation 2 Setup and Installation Guide

3-20 Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Rob Weaver Project: Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203844-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 4/5/01 1:55 PM
DIMM Slot Identification
Use Figure 3-18 and Table 3-2 to identify DIMM slots on the ProLiant DL380
Generation 2 server system board. The slots are numbered sequentially
(1 through 6), and the paired banks are identified by the letters A, B, and C.
1 2 3 4 5 6
Figure 3-18. Identifying DIMM slots on the system board
Table 3-2
DIMM Slot Locations
Item Description
DIMM slot 1A populated with 128-MB DIMM
DIMM slot 2B
DIMM slot 3C
DIMM slot 4A populated with 128-MB DIMM
DIMM slot 5B
DIMM slot 6C
Maximum Memory Configuration
In the maximum memory configuration, all six DIMM slots are populated with
1-GB 133-MHz ECC registered SDRAM DIMMs.