Compaq ProLiant DL380 Generation 2 Setup and Installation Guide

E-10 Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Rob Weaver Project: Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203844-001 File Name: n-appe LED Indicators and Switches.doc Last Saved On: 4/5/01 2:11 PM
Hot-Plug Power Supply LED
Determine the hot-plug power supply status by observing the status of the
power supply LED located adjacent to the AC inlet (Figure E-7).
Figure E-7. Hot-plug power supply LED
When the power supply LED is off, the following conditions may exist:
■ The AC power is unavailable.
■ The power supply has failed.
■ The power supply is in standby mode.
■ The power supply has exceeded current limit.
When the power supply LED is green, the power is turned on and the power
supply is functioning properly.