Compaq ProLiant DL380 Generation 2 Setup and Installation Guide

Server Features 1-5
Compaq Confidential – Need to Know Required
Writer: Rob Weaver Project: Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203844-001 File Name: b-ch1 Server Features.doc Last Saved On: 4/5/01 1:51 PM
Smart Array 5i Controller
Features of the Smart Array 5i Controller include:
■ 32 MB total memory for code, transfer buffers, and read cache
■ Support for up to six internal Wide Ultra3 SCSI hot-plug hard drives in
RAID 0, RAID 1, RAID 0+1, and RAID 5
■ Support for external tape drives and external storage through the SCSI
connector on the rear panel
■ Support for Compaq Universal Hot-Plug Tape
■ Easy-to-use Array Configuration Utility
■ Option ROM Configuration for Arrays
■ Performance monitoring, Pre-Failure Notification, and Pre-Failure
Warranty through Compaq Insight Manager ™ XE
■ Online capacity expansion and spares
■ Migration from any RAID level to any other RAID level or from any
stripe size to any other stripe size
■ Support for low voltage differential SCSI devices on both channels
Standard Network Interface Controllers
The standard NICs provided with your server have the following features:
■ Two embedded Intel 82559 Fast Ethernet NICs with 10/100 WOL
■ Auto-sensing LAN capable at either 10 or 100 Mb/s
■ Full-duplex Ethernet for two-way transmission
■ Optional PXE support