Compaq ProLiant DL380 Generation 2 Setup and Installation Guide

1-4 Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Rob Weaver Project: Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 203844-001 File Name: b-ch1 Server Features.doc Last Saved On: 4/5/01 1:51 PM
System Memory
ProLiant DL380 Generation 2 servers support the following memory features:
■ 133-MHz registered SDRAM memory
■ ECC memory for single-bit memory error correction and multi-bit
memory error detection
■ System memory expandable to 6 GB
■ Up to 2 GB of configurable online spare memory
■ Support for 2:1 interleaving DIMM modules
Expansion Slots
ProLiant DL380 Generation 2 servers provide support for peripheral
components. The PCI riser cage has three expansion slots:
■ Two 64-bit/66-MHz full-length PCI Hot Plug slots
■ One 64-bit/33-MHz full-length PCI slot
SCSI Subsystem
ProLiant DL380 Generation 2 servers include a SCSI subsystem with the
following features:
■ System board connectors for Smart Array 5i Controller
■ One internal SCSI port supporting up to six internal hot-plug SCSI hard
drives
■ One external VHDCI SCSI connector supporting up to 14 hard drives or
tape drives
■ Maximum data transfer of 160 MB/s on each SCSI bus