Compaq ProLiant DL380 Generation 2 Server High-Density Deployment in Compaq Racks

Compaq ProLiant DL380 Generation 2 Server High-Density Deployment in Compaq Racks 35
Compaq Confidential - Need to Know Required
14UH-0701A-WWEN
Appendix B −
−−
− Parts Reference
The parts referenced in this white paper are listed in this appendix. Refer to
Compaq ProLiant DL380 Generation 2 Server QuickSpecs for more option parts.
Note: In this appendix, the notation Int’l (or) International is used for a part number for the
countries not explicitly listed for that part. The other notations are as follows:
APD Asia Pacific
EURO Europe
N.A. North America (including U.S., Canada, Mexico)
U.K. United Kingdom
Table 14. Power Management
Part Compaq P/N Notes
Vertical-Mount PDU Brackets kit 191265-B21 8 brackets
Vertical-Mount PDU Brackets Option with High-
Voltage Cables kit
166097-B21 4 brackets and 11 Y-power cords
Each Y-power cord is 10 ft in length (6-ft
single-section and 4-ft dual-sections).
These cables are not available
separately from this option kit.
10A IEC to IEC cable kit 2.0 m / 6 ft
2.5 m / 8 ft
3.0 m / 12 ft
142257-001
142257-002
142257-003
The IEC-to-IEC cables can be used
either as individual power cords for the
server or to extend the length of the
high-voltage Y-cables. The cables are
available in 6-, 8-, and 10- ft lengths.
The ProLiant DL380 Generation 2 server
ships with one 10-ft IEC-to-IEC cable,
part number 142257-003.
Table 15. Console management
Part Availability Compaq P/N Notes
TFT 5010R Flat Panel
Monitor
N.A., International 104741-001
104741-B24
TFT5000R Flat Panel
Monitor
N.A, Japan 120207-001
120207-291
TFT5000R Flat Panel
Monitor
International 120207-B31
Server Console Switch
1 x 8-port (100-230VAC).
N.A., International,
Japan
400337-001
400337-B31
400337-291
The power cord shipped with this
switch is for low-voltage PDUs. High-
voltage PDUs may use the Y-cables
included in the Vertical-Mount
Bracket kit.
continued