Compaq ProLiant DL380 Generation 2 Server High-Density Deployment in Compaq Racks

Compaq ProLiant DL380 Generation 2 Server High-Density Deployment in Compaq Racks 33
Compaq Confidential - Need to Know Required
14UH-0701A-WWEN
Remote Console Management
The remote console management system uses a CAT5 cable connected to the RJ-45 connector in
the Remote Insight Lights-Out Edition PCI board and the power cord. Route these cables through
the cable management arm according to the instructions in the Compaq ProLiant DL380
Generation 2 Server Setup and Installation Guide. Connect the power cord to the PDU and the
CAT5 cable to the network data line outlet.
Completing the Installation
To complete the installation:
1. Install side panels on the outsides of the end racks.
2. Install the front and rear doors.
3. Connect the PDUs to the power source.
4. Power up the servers.