Ultra-Dense Server Deployment in Third-Party Racks

Compaq Ultra-Dense Server Deployment in Telecommunications (Telco) Racks 12
12CZ-0400A-WWEN
Installation Procedures for Telco Racks
Adapt the following procedures to create deployments of ultra-dense Compaq
ProLiant DL360 servers in a telco rack.
Installing the Compaq Telco Rack Option Kit Rack Rails
Install all rack rails to the telco frame before installing any servers. The rack rail mounting
brackets adjust from 3 inches to 5 inches to accommodate varying telco frame thickness. The
adjustment screws require a #15 Torx driver or slothead screwdriver.
Figure 7: Bracket mount adjustment screws on the Compaq Telco Rack Option Kit rack rails
Refer to the Compaq Telco Rack Option Kit installation guide for complete instructions.