Ultra-Dense Server Deployment in Racks

Compaq Ultra-Dense Server Deployment in Compaq Racks 42
128H-0400A-WWEN
Configuration-H Parts List
Description Compaq P/N Qty. Notes
Sliding rails and cable management solution
option
174575-B21 35 Optional for in-rack servicing.
Server Console Switch option 400337-001 5 1x8 Port KVM
Internal Keyboard with Trackball option 185152-186 1 [See Note(a)]
1U Keyboard Tray option 338056-B21 1
TFT 5000R Rack Mount Flat Panel Monitor
option
120207-001 1
High Voltage 24A PDU option 295365-003 2 N.A. [See Note(b)]
CPU-to-Server Console Cables option 110936-B24, or
110936-B25
39 3 ft for fixed rails
6 ft for sliding rails
[These 3 ft and 6 ft cables will
be available 3Q00.]
Vertical-Mount PDU Bracket Kit with High
Voltage Cables
166097-B21 2 Each kit contains 4 PDU
brackets and 11 Y-power
cords.
Note:
This list does not include the rack, the ProLiant DL360 servers, and the network cables.
(a) Part numbers for the regions outside N.A. are listed in Appendix B on page 83.
(b) At this time, only one model of the high current (24A) High Voltage PDU is available. This
configuration can be used in regions where NEMA electrical standards are followed. See Section 2.3.1
for more details on the high current High Voltage PDU.
Configuration-H Installation Procedure
Procedure Section [page]
ProLiant DL360 Preparation 4.1 [55]
Rack Preparation 4.2 [56]
PDU Installation Mechanical unit
Power cord wiring*
4.3.2 [59]
4.3.5.1 [62]
Rack Rails Installation 4.4 [74]
Rack Population 4.5 [75]
Cable Dressing Power cord connections
Console cable connections
Cable management procedure
4.6.1 [76]
4.6.2.3 [77]
4.6.3 [79]
Completing the Installation 4.7 [81]
* Note: Use the same cabling diagram for 42 servers case. KVM switch and FPD units do not consume
as much power as ProLiant DL360.