Ultra-Dense Server Deployment in Racks

Compaq Ultra-Dense Server Deployment in Compaq Racks 13
128H-0400A-WWEN
2.1 ProLiant DL360 Server Parameters
This section describes the abbreviated measured and specification values for ProLiant DL360 parameters.
Most parameters listed in Table 2-1 will be used as a reference in discussing power budgets and in
calculating total rack configuration weight. The SA4200 option and the Remote Insight Lights-Out
Edition option are PCI cards from Compaq. Make sure that all the third-party PCI cards used in the
ProLiant DL360 server are compliant with the industry-standard PCI specifications for dimension, weight,
power and thermal requirements.
Table 2-1. ProLiant DL360 parameters
Dimensions HxWxD
1.65 x 16.75 x 25 in (4.19 x 42.55 x 63.5 cm)
Weight 24 lb as shipped (1xprocessor, 1x128MB DIMM, 2xHDD blanks)
29.3 lb fully-configured (2xprocessors, 4xDIMMs, 2xHDDs, 1xSA4200, 1x Remote
Insight Lights-Out Edition)
• Processor: 0.2 lb (with the heat sink and clip)
• DIMM: 0.1 lb
• HDD: 1.9 lb (with the carrier)
• Remote Insight Lights-Out Edition: 0.5 lb
• SA4200: 1.0 lb
Power Rating Max. Output DC power is rated at 190W
Power Supply Efficiency (including Power Factor Correction) is rated at 65%
Max. Input AC power is rated at 292W [Input Power = Output Power / Efficiency]
Max. input current rating depends on the line voltage. For example,
2.66A @110V AC (low voltage)
1.41A @208V AC (high voltage)
Thermal Dissipation Up to 1000 BTUs/hour
Temperature Rise Up to 25°C T-rise between front and rear
Relative Humidity
(non-condensing)
Operating: 8% to 90%
Non-operating: 5% to 95%