ProLiant DL360 Server Maintenance and Service Guide

Diagnostics and Troubleshooting
Compaq ProLiant DL360 Server Maintenance and Service Guide 4-67
COMPAQ CONFIDENTIAL Codename: MIcroMachines Part Number: 169616-006 Last Saved On: 12/21/01 9:05 AM
ASR-2 Integrated Management Log Messages
The Integrated Management Log (IML) records memory errors, as well as catastrophic
hardware and software errors that cause the system to fail. This information helps you quickly
identify and correct the problem, thus minimizing downtime.
You can view the IML through Compaq Insight Manager. The Diagnostics Utility either
resolves the error or suggests corrective action in systems that do not support event logs.
The IML or Integrated Management Log identifies and records all the following errors. Each
error type is explained below.
Table 4-21: ASR-2 IML Messages
Message Description
Abnormal Program Termination The operating system has encountered an
abnormal situation that has caused a system
failure.
ASR-2 detected by ROM An ASR-2 activity has been detected and
logged by the system ROM.
ASR-2 Test Event The System Configuration Utility generated a
test alert.
Automatic Server Recovery Base Memory
Parity Error
The system detected a data error in base
memory following a reset due to the Automatic
Server Recovery-2 (ASR-2) timer expiration.
Automatic Server Recovery Extended Memory
Parity Error
The system detected a data error in extended
memory following a reset due to the ASR-2
timer expiration.
Automatic Server Recovery Memory Parity Error The system ROM was unable to allocate
enough memory to create a stack. Then, it was
unable to put a message on the screen or
continue starting the server.
Automatic Server Recovery Reset Limit
Reached
The maximum number of system resets due to
ASR-2 timer expiration has been reached,
resulting in the loading of Compaq Utilities.
Battery Failing Low system battery warning. Replace battery
within 7 days to prevent loss of nonvolatile
configuration memory. Failure of the battery
supporting the system’s nonvolatile RAM is
imminent.
Caution: Temperature Exceeded The operating system has detected that the
temperature of the system has exceeded the
caution level. Accompanying data in the log
notes if an auto-shutdown sequence has been
invoked by the operating system.
Diagnostic Error An error was detected by the Diagnostics Utility.
See the specific error code in this chapter for a
detailed explanation.
continued