ProLiant DL360 Server Maintenance and Service Guide

Diagnostics and Troubleshooting
Compaq ProLiant DL360 Server Maintenance and Service Guide 4-65
COMPAQ CONFIDENTIAL Codename: MIcroMachines Part Number: 169616-006 Last Saved On: 12/21/01 9:05 AM
Booting into the Operating System
When you enable ASR-2 to restart into the operating system and a critical error occurs,
ASR-2 logs the error in the IML and restarts the server. The system ROM pages the
designated administrator, then executes the normal restart process.
IMPORTANT: When you enable ASR-2 to restart into the operating system, Modem Dial-In Status,
Network Status, and Modem Dial-Out Status are automatically disabled. In this mode, ASR-2 can page
you if a critical error occurs, but you cannot access the server, and the server cannot dial out to a
remote workstation.
If the ASR-2 feature cannot restart the server within 10 attempts, it logs a critical error in the
IML and restarts the server into the Compaq Utilities, and puts the modem into auto-answer
mode.
The System Configuration Utility setting should resemble the following when you enable
ASR to restart into the operating system:
Table 4-20: OS Restart SCU Setting for ASR•2
Option Setting
Serial interface COM1
Dial-in status Disabled
Dial-out status Disabled
Dial-out string 555-1234
Network status Disabled
Network protocol IPX
Network controller Compaq
Network host name CPQHOU
Network card slot Slot #
Network frame type ETHERNET_II
Network IP address xxx.xxx.xxx.xxx
Network IP net mask xxx.xxx.xxx.xxx
Network IP router address xxx.xxx.xxx.xxx