Configuring a Pre-eXecution Environment (PXE) using Red Hat Linux 6.2 on Compaq ProLiant Servers

Configuring a Pre-eXecution Environment (PXE) using Red Hat 6.2 Linux on Compaq ProLiant Servers 2
14K1-0301A-WWEN
Notice
©2001 Compaq Computer Corporation.
ActiveAnswers, Compaq, the Compaq logo, Compaq Insight Manager, NetFlex, ProLiant, ROMPaq,
SmartStart, StorageWorks are registered United States Patent and Trademark Office.
ProSignia and SoftPaq are trademarks and/or service marks of Compaq Computer Corporation.
Netelligent, and TaskSmart are trademarks and/or service marks of Compaq Information Technologies
Group, L.P. in the U.S. and/or other countries.
UNIX is a registered trademark of The Open Group.
Linux is a registered trademark of Linus Torvalds.
Red Hat is a registered trademark of Red Hat, Inc.
Adobe, Acrobat, and the Acrobat logo are trademarks of Adobe Systems, Inc.
Other product names mentioned herein may be trademarks and/or registered trademarks of their respective
companies.
The information in this publication is subject to change without notice and is provided “AS IS” WITHOUT
WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE USE OF THIS
INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL COMPAQ BE LIABLE FOR
ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR OTHER DAMAGES
WHATSOEVER (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSINESS INFORMATION), EVEN IF
COMPAQ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The limited warranties for Compaq products are exclusively set forth in the documentation accompanying
such products. Nothing herein should be construed as constituting a further or additional warranty.
This publication does not constitute an endorsement of the product or products that were tested. The
configuration or configurations tested or described may or may not be the only available solution. This test
is not a determination or product quality or correctness, nor does it ensure compliance with any federal
state or local requirements.
Configuring a Pre-eXecution Environment (PXE) using Red Hat 6.2 Linux on Compaq ProLiant Servers
Integration Notes prepared by OS Integration Engineering
Third Edition (March 2001)
Document Number 14K1-0301A-WWEN