Compaq ProLiant DL360 Ultra-Dense Server Deployment in Compaq Racks

Compaq ProLiant DL360 Ultra-Dense Server Deployment in Compaq Racks 30
128H-1100B-WWEN
Sections 3.1 through 3.14 of this paper describe individual rack configuration, each with the rack
U-space layout, the rack contents, the parts lists, and the installation procedures. The rack U-
space is numbered from the bottom to the top for reference purposes. Compaq racks have tick
marks for every 1U space.
Figure 3-1. Rack Configuration Selection Tree (Table 3-1 shows pages for letter definitions)
42U Rack
24A Low Voltage PDU
(4 PDUs)
Full-Rated
Power Budget
De-rated
Power Budget
Remote
Console
(36 servers)
Local
Console
In-Rack
(35 servers)
Off-Rack
(36 servers)
“I”“E+F*”
“E”
Local
Console
Off-Rack
(42 servers)
“D”
“D+F”
Remote
Console
(
42 servers
)
Local
Console
In-Rack
(35 servers)
“G” “F”
“B”
24A High Voltage PDU
[N.A. only]
Off-Rack
(42 servers)
Full-Rated
Power Budget
(3 PDUs)
De-Rated
Power Budget
(
2 PDUs
)
Local
Console
“H” “A+F”
“A”
Remote
Console
(
42 servers
)
In-Rack
(35 servers)
Off-Rack
(42 servers)
Note:
• “X” notation is to use Configuration-X for all
installation procedures
• “X+Y” notation is to use Configuration-X for the
PDU installation and power cord connections, and
use Configuration-Y for console cable connections.
• For “D+F*”, use the console cable connections
described in Configuration-F, but only for 36
servers.
• Table 3-1 shows where Configuration-X can be
found in this paper.
16A High Voltage PDU
(4 PDUs)
“C”
Remote
Console
(42 servers)
Remote
Console
(
42 servers
)