Compaq ProLiant DL360 Ultra-Dense Server Deployment in Compaq Racks

Compaq ProLiant DL360 Ultra-Dense Server Deployment in Compaq Racks 19

128H-1100B-WWEN

Table 2-3. Measured input power for selected server configurations

Configuration

Number

ProLiant DL360 Configuration

Power Input

Typical / Peak

1 1x550 MHz, 1x128 MB, 1x18.4 GB (base-line) 90W / 110W

2 1x550 MHz, 2x128 MB, 2x9.2 GB, Remote Insight Lights-Out Edition 102W / 131W

3 1x800 MHz, 1x128 MB, 1x18.4 GB (base-line) 100W / 115W

4 2x800 MHz, 1x1 GB, 2x18.4 GB, Remote Insight Lights-Out Edition 134W / 156W

5 2x800 MHz, 4x1 GB, 2x18.4 GB, SA4200, Remote Insight Lights-Out Edition 170W / 185W

6 1x866 MHz, 1x128 MB, 1x18.4 GB (base-line) 103W / 117W

7 1x933 MHz, 1x128 MB, 1x18.4 GB (base-line) 105W / 119W

8 2x866 MHz, 1x1 GB, 2x18.4 GB, Remote Insight Lights-Out Edition 140W / 160W

9 2x933 MHz,4x1 GB, 2x184 GB, SA 4200, Remote Insight Lights-Out Edition 180W / 193W

Note: Peak power of a fully configured ProLiant DL360 (Configuration 5) was measured to be

only about 67% of its rated peak input power. This power may be higher if the Remote Insight

Lights-Out Edition option is replaced by a RAID storage controller.

Table 2-4. Measured input power for optional subsystem components

Sub-system Components

Power Input

Typical / Peak

Intel Pentium III 800-MHz Processor

Intel Pentium III 933-MHz Processor

23W / 26W

28W / 30W

128-MB DIMM

256-MB DIMM

512-MB DIMM

1-GB DIMM

1W / 3W

1W / 4W

2W / 5W

9.2-GB HDD

18.4-GB HDD

13W / 35W

16W / 38W

Remote Insight Lights-Out Edition 9W / 11W

SA4200 9W / 16W

Note: DIMM and HDD input power can vary depending on the component and drive

manufacturer.