Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Server Installation 4-15
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: e-ch4 Server Installation.doc Last Saved On: 8/31/01 11:42 AM
4. Press the F10 key to exit RBSU or press any other key to return to the
RBSU main menu.
After RBSU configures the hardware for the first time, use SmartStart to
install an operating system.
1. Insert the SmartStart CD or the selected operating system
installation CD.
2. Restart the server.
3. Follow the instructions provided by SmartStart or the operating system
manufacturer.
For more information about using RBSU or SmartStart to configure the server,
see Chapter 8, “Server Configuration Utilities.”
The ProLiant DL360 G2 server supports the following operating systems:
■ Microsoft Windows NT and Windows 2000
■ Linux
■ Novell NetWare
■ Sun Solaris for Intel Platform Edition
For the most current information about operating system support on
ProLiant DL360 G2 servers, refer to the operating system support matrix
available at the Compaq FTP site:
ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf
To create a backup of the hardware configuration, use the Configuration
Replication Utility. For more information, see the “SmartStart Scripting
Toolkit” section in Chapter 8, “Server Configuration Utilities.”
Registering A Server
To register a server, log on to the Internet at
www.compaq.com/products/registration
Routine Maintenance
For information concerning routine maintenance and safety precautions, refer
to the Documentation CD included in the Documentation pack shipped with
the server.