Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

4-10 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: e-ch4 Server Installation.doc Last Saved On: 8/31/01 11:42 AM
8. At the rear of the rack, secure the fixed cable tray to the server by
turning the thumbscrew in a clockwise direction.
Figure 4-9. Securing the cable tray to the server
Connecting the Power Cord and Peripheral Devices
After the server has been installed in the rack, connect the power cord and
peripheral devices to the connectors located on the rear panel of the server.
Icons on the back of the server identify the function of each connector.
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the NIC connectors.
Use the following figure and table to identify connectors, and follow the
connection order to attach all cables and the power cord. The location numbers
in the figure and table correspond to the connection order for the peripheral
cables and power cord.