Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

3-36 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/31/01 11:44 AM
SCSI ID Numbers for Wide Ultra3 SCSI Models
The ProLiant DL360 G2 standard configuration consists of two 1-inch hot-
plug SCSI hard drive cages and numbered SCSI IDs: 0 and 1 from left to right,
and .
IMPORTANT: Always populate hard drive bays starting with the lowest SCSI ID.
1 2
Figure 3-33. SCSI ID numbers
Installing External Storage Devices
Additional mass storage devices may be connected to the Compaq
ProLiant DL360 G2 server through optional array controller expansion boards.
For more information about cabling external storage devices, see Chapter 7,
“Server Cabling.”
For additional information on configuring a server, refer to the Documentation
CD shipped with the server.