Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

3-26 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/31/01 11:44 AM
5. To remove the cover in expansion slot 1 (Figure 3-20)
a. Slide the expansion board retaining clip away from the assembly
.
b. Slide the expansion slot cover laterally until it disengages from the
sleeve.
c. Remove the expansion slot cover
.
1
2
Figure 3-20. Removing the cover from expansion slot 1
6. To install an expansion board into slot 1(Figure 3-21)
a. Align the expansion board with the slot guide
.
b. Slide the expansion board into the slot and ensure the board seats
firmly
.
c. Slide the expansion board retaining clip back into place
, securing
the end of the expansion board against the assembly.