Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Installing Hardware Options 3-17
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/31/01 11:44 AM
4
1
5
2
3
6
Figure 3-12. Installing a processor
9. If the processor was installed into a previously empty slot a PPM must
also be installed. To install a PPM:
a. Use Figure 3-10 and Table 3-2 to identify the correct PPM socket.
b. Open the PPM socket latches.
c. Align the key slot in the bottom edge of the PPM with the key in the
PPM socket.
d. Insert the PPM into the socket
. See Figure 3-13.
e. Press down firmly on the PPM and close the latches
.