Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

1-8 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: b-ch1 Server Features.doc Last Saved On: 10/12/01 9:39 AM
Optional Rack Deployment Solutions
The ProLiant DL360 G2 server supports several rack deployment options.
Sliding Rail and Cable Management System
Option
The universal rack rail allows the mounting of either fixed or sliding rails. The
sliding rail and cable management system option allows the ProLiant DL360
G2 server to be mounted on sliding rails that support in-rack serviceability.
Rack depths of 24 in (61 cm) to 36 in (91 cm) are supported. The cable
management system provides a clean, effective way to route server cables.
The following figure shows the server extending from the rack on optional
sliding rails.
Figure 1-3. Extending the server on sliding rails