Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

10 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: r-index.doc Last Saved On: 10/12/01 3:25 PM
grounding requirements 2-4
options 3-3, 3-9
ordering requirements 2-5
physical specifications 2-5
power requirements 2-3, 2-5
resources 2-4
site planning 2-5
space requirements 2-2
stabilization 2-6
Telco, stability of 2-6
tools, installation 2-8
video, Installing Rack
Products 2-5
warnings 2-6
weight 2-6
Rack Builder Pro Configuration
Tool CD 2-4
rack door ventilation 2-3
Rack Information Library CD 4-1
Rack Products
Documentation CD 2-5
rack rails, fixed
attaching to the rack 4-4
installing 4-6
Rack Resource CD 2-4
rack template
alignment 4-3
measuring with 4-2
rack-mounting hardware kit,
illustrated 2-7
RAID levels
supported 1-5
rail-release latches
disengaging 3-7
warning 3-7
rails
server
shipping location 2-8
standard
shipping location 2-8
RBSU See ROM-Based Setup
Utility (RBSU)
rear panel
connectors, location and
order 4-11
LEDs C-3
reboot
remote 6-2
recharge warning A-7
recycling, battery A-7
redundant boot capability 1-3
redundant ROM 1-7, 1-10
accessing 8-8
benefits 8-8
defined 8-8
registering your server 4-15
regulations
Class A A-2
Class B A-2
regulatory compliance,
identification number A-1
release buttons
hard drive blanks 3-35
hot-plug SCSI hard
drives 3-37
remote access 6-2
Compaq Insight
Manager XE 1-11
remote console
hardware-based 6-2
remote firmware update 6-3
Remote Insight Lights-Out Edition
interface cable
connector 3-12
remote reboot 6-2
removing
access panel 3-8
battery E-2
hard drive blanks 3-34
heat sink 3-14
PCI riser board assembly 3-23
processors 3-14
SCSI hard drives 3-37
thermal pad 3-14
requirements
airflow, rack 2-2
current load 2-3
Diskette Builder utility 8-11
driver for internal health
LED C-9
grounding, rack 2-4
input F-1