Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Server Features 1-5
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: b-ch1 Server Features.doc Last Saved On: 10/12/01 9:39 AM
Smart Array 5i Controller
Features of the Smart Array 5i Controller include:
■ 32 MB total memory, 16 MB used for code with 16 MB for transfer
buffers and read cache
■ Support for two internal Wide Ultra3 SCSI hot-plug hard drives in
RAID 0 and RAID 1 configurations
■ Easy-to-use Array Configuration Utility
■ Option ROM Configuration for Arrays
■ Performance monitoring, Pre-Failure Notification, and Pre-Failure
Warranty through Compaq Insight Manager XE
■ Online capacity expansion
■ Support for low voltage differential SCSI devices
Standard Network Interface Controllers
The standard NICs provided with a ProLiant DL360 G2 server have the
following features:
■ Two Compaq NC7780 Gigabit server NICs
■ Auto-sensing LAN capable of 10/100/1000 Mbps
■ Full-duplex Ethernet for two-way transmission
■ PXE support