Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Index 7
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: r-index.doc Last Saved On: 10/12/01 3:25 PM
Class 1 product A-5
compliance A-6
device regulatory compliance
notice A-5
information A-7
product label A-6
regulations, CDRH A-6
type A-7
latches, rail-release 3-7
LEDs
DIMM failure C-8
front panel C-1
hot-plug SCSI hard drives
drive activity C-5
fault status C-5
online status C-5
interlock 10-5
internal C-7
network activity C-3
network link C-3, C-4
overtemperature C-9
power
external C-2
status 10-5
processor failure C-9
rear panel C-3
rear unit identification C-3
status combinations C-9
system board C-7
legacy USB device support 1-10,
8-9
leveling jacks 2-6
levers
ejector
hot-plug SCSI hard drives 3-37,
3-38
PCI riser board assembly 3-29
expansion board
retaining 3-23, 3-30
lithium battery A-7
lithium manganese dioxide battery
warning A-7
locating
CD-ROM/diskette drive
assembly cabling 7-2
DIMM sockets 3-19
expansion slots 3-22
processors 3-13
rear panel connectors 4-11
unit identification
switches 3-4, 3-5
log
event list 9-3
Integrated Management Log
(IML) 9-1
logs
server health 1-11
M
maintenance and service
guide 4-16
maintenance and service guide,
website 10-1
maintenance, routine 4-15
management
Compaq Insight Manager 9-2
features 1-10
Integrated Management
Display (IMD) 9-1
remote operations See remote
access
management processor 6-7
mass storage devices
external, installing
optional 3-36
features, standard 1-6
internal 7-2
maximum, external 7-7
measuring with the rack
template 4-2
memory
capacity 1-3
configuration
minimum 10-2
features 1-3
installation 3-19
insufficient during install 10-7
menus, ROM-Based Setup Utility
Advanced Options 8-5
Automatic Server
Recovery 8-5