Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

4 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: r-index.doc Last Saved On: 10/12/01 3:25 PM
disengaging
heat sink retaining clip 3-14
rail-release latches 3-7
disk controller See Integrated
Smart Array Controller; Smart
Array 5i Controller
diskette boot control
disabling 8-7
setting in RBSU 8-4
diskette boot override 1-12
Diskette Builder utility
defined 1-10, 8-11
operating systems 8-11
requirements 8-11
running 8-11
diskette drive control 1-12
diskette drives
USB device support 8-9
diskette write control
disabling 8-7
security feature 1-12
setting in RBSU 8-4
disposal, battery A-7
dissipating floor mats B-2
DNS name 6-4
documentation
Compaq Insight
Manager XE 8-12
kits 2-7
required for server
installation 2-7
SmartStart Scripting
Toolkit 8-12
software packs 2-7
Documentation CD 1-11, 8-3
drive bays
configuration 1-6
drivers
Compaq system
management 8-13
health 8-13
installing with
SmartStart 8-10
updating 8-10
drives
CD-ROM
USB device support 8-9
diskette
USB device support 8-9
SCSI hard
maximum supported,
internal 1-6
E
ECC memory 1-3
ejecting
PCI riser board assembly 3-24
SCSI hard drives 3-31
ejector
handle, hot-plug SCSI hard
drives 3-37
PCI riser board assembly 3-24
ejector port, CD-ROM/diskette
drive assembly 3-31
electromagnetic immunity A-4
electromagnetic interference A-4
electrostatic discharge B-1–B-2
caution 3-2
prevention measures B-1
embedded COM Port A,
disabling 8-6
embedded mouse port,
disabling 8-6
embedded NIC PXE support
disabling 8-7
enabling
asset tag 8-7
embedded NIC PXE
support 8-7
network server mode 8-7
engaging the heat sink retaining
clip 3-18
environmental requirements 2-2
equipment
Class A A-2
Class B A-2
erasing non-volatile memory 8-7
errors
insufficient memory
message during install 10-7
server keeps rebooting 10-2