Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Installing a New Battery E-3
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: p-appe Installing a New Battery.doc Last Saved On: 8/3/01 2:21 PM
8. Insert the server into the rack. See “Inserting the Server into the Rack”
in Chapter 4, “Server Installation.”
9. Fasten the thumbscrew that secures the fixed cable tray to the server.
See “Attaching the Fixed Cable Tray” in Chapter 4, “Server
Installation.”
10. Reconnect the power cord and peripheral devices. See “Connecting the
Power Cord and Peripheral Devices” in Chapter 4, “Server Installation.”
11. Power up the server. See “Powering Up the Server” in Chapter 4,
“Server Installation.”
12. Run the “ROM-Based Setup Utility” to reconfigure the system with the
new battery. See Chapter 8, “Server Configuration and Utilities.”