Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Switches and Jumpers D-3
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: o-appd Switches and Jumpers.doc Last Saved On: 8/31/01 11:46 AM
Table D-3
Miscellaneous Support (SW4) Switch
Switch Position On/Off Function
On Reserved
S1
Off * Reserved
On NVRAM Write Disable (Prevents system reconfiguration)
S2
Off * NVRAM Write Enable (Allow system reconfiguration)
On * Rack Mount (Indicates system is rack mounted)
S3
Off Tower Configuration
On Floppy Boot Override
S4
Off* Floppy Boot Control (Allowed by configuration)
On Power On Password Disabled
S5
Off * Power On Password Enabled (Setup in configuration)
On NVRAM Maintenance (Clears NVRAM prior to
reconfiguration)
S6
Off * NVRAM Enabled (Current contents valid or ready for
reconfiguration. Used in conjunction with S2)
S7
On IIC Write Enabled
Off * IIC Write Protect
S8
Off * Reserved – Default position
An asterisk (*) indicates the normal default operating position of a switch