Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Server Configuration and Utilities 8-5
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: i-ch8 Server Configuration Utilities.doc Last Saved On: 9/5/01 2:58 PM
QuickLock allows the keyboard to be locked while unattended. Pressing any
key prompts for the power-on password to unlock the keyboard.
IMPORTANT: In the event of a forgotten password, all passwords will be cleared by
resetting the system maintenance switch (SW4-6 On, SW4-2 must be Off). See “System
Configuration Switches” in Appendix D, “Switches and Jumpers.”
Automatic Server Recovery
The Automatic Server Recovery menu includes the following items:
Automatic Server Recovery allows this option to be enabled or disabled.
Thermal Shutdown will occur when the system detects a thermal caution
event. This option is enabled by default. Compaq does not recommend
disabling this feature.
Server Asset Tags
The Server Asset Tags menu allows access to the Server Info Text.
Server Info Text identifies the system with an Asset Tracking Number.
Advanced Options
The Advanced Options menu allows configuration of advanced system
options. The following selections are available in this menu:
MPS Table Mode allows changes to the APIC table settings. The APIC table
settings are automatically set by the OS Selection.
POST Speed Up allows a quick start process. When disabled a complete
memory test is performed.
Erase Non-volatile Memory causes the current system configuration to be
deleted.
Advanced Memory Protection sets the system to use the standard paired
DIMM configuration with ECC.