Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

8-2 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: i-ch8 Server Configuration Utilities.doc Last Saved On: 9/5/01 2:58 PM
ROM-Based Setup Utility
RBSU performs a wide range of configuration activities including the
following:
■ Configuring system devices and installed options
■ Viewing system information
■ Selecting the operating system
■ Selecting the primary boot controller
■ Managing storage options
In addition, RBSU includes other features, which are outlined in the “Using
RBSU” section in this chapter.
Navigating RBSU
To navigate RBSU, use the following keys:
■ To access RBSU, press the F9 key during power up.
■ To navigate the menu system, use the arrow keys.
■ To make selections, press the Enter key.
RBSU automatically saves settings when the Enter key is pressed. The utility
does not prompt for confirmation of settings before exiting the utility. To
change a selected setting, select a different setting and press the Enter key.
Using RBSU
When the server is powered up for the first time, the system prompts to enter
the RBSU. Select an operating system and a language. Default configuration
settings are made at this time and can be changed later.
NOTE: Most of the features in RBSU are not required in the setup of the server. The
options in this utility are designed to assist with specific server configuration issues.
The RBSU is divided into a series of menu selections designed to configure
specific areas of the system. The primary menus are as follows:
■ System Options
■ IPL Device Boot Order